LAMPS!! How To


Includes "corona light night light" paper lamps & other lamps


Corona "light" night light : Things you will need


1 Corona "light"


Purchase a selection of glass bits from the local home center or hardware store. Carbide bits have a spade shaped point


LED Christmas lights


Step 1: drill a big enough hole at the bottom of the bottle to fit led lights through.


<---------


Step 2: start stuffing the led lights through the bottom hole. Quick tip! make sure the plug-in side is sticking out of the bottle from the bottom hole.
.


Success!! you can now enjoy your corona "light" night light




























Giant Japaneses style paper lamp: Things you will need.


9 wire hangers.


Wooden platform for base


Elmers glue, 1 cup of water and 1 foil
                                    baking pan.
.


lamp socket adapter.


one light bulb


Wire cutters


Tissue paper,whatever color you choose will be the color of your lamp


hammer and nail


Step 1 : bend 8 hangers in this shape


1. remember to wire cut to the length you want
 
or you dont have to cut at all depends how big you want it.Make shure to make the rest of the hangers in the same shape and length.



 <------- 1.


Step 2: Now, make 8 holes in the base board with the hammer and nail in this pattern. Make sure to make the holes deep enough but through the wood


-------


I
I


X


Step 3: cut off a piece of hanger and bend it into a circle, this will be the top of the lamp. You can make it as big as you want.Tape the ends together.


Step 4: put 4 wires in the holes make sure they are secure,also make sure to line them up across from another.


Step 5: connect the circle you made in step 3 at the top of the 4 wires with tape. Make sure they line up from the bottom to top


Step 6: make another circle but bigger so that it can be placed half way down the lamp


the circle should get stuck about half way down the lamp, when it's stuck, tape it to each wire for added stregth.


<------


continue to connect the rest of the wires accordingly


Step 7: Now, mix the glue and water together and pour a little into the baking pan.Now cut a long strip of tissue paper and dip it in the pan.


Scissors


 Step 8: Place tissue sheets on lamp verticaly


Step 9: Leave a space open, that is where the light goes.


Thread


Step 10: Tie a piece of thread to  a straight piece of wire,make sure to make the wire long enough to rest comfortably on top of the lamp.


 Let the thread hang down the through the hole at the top of the lamp


---------->


Step 11: connect the bulb to the socket and tie the thread to the socket so that it's dangling


extension cord


Success!! now get an extension cord and plug it in. You can now enjoy your paper lamp